Wednesday, 10 June 2020

How to setup Re.rockspace.local router


How to setup Re.rockspace.local router

Re.rockspace.local is the setup page where you can setup your rock space extender via browser. Sometimes we have routers which don't support the WPS setup. In that case we recommend you connecting your extender to the power outlet and then connect your phone or laptop to the rockspace_ext in your WiFi list. Now as soon as you open a browser it will take you to the rockspace setup wizard. Or even you can type re.rockpscae.local in the url or address bar of your browser. On re.rockspace.local you will have to type username and password as "admin" and then start the setup process. In case you are not able to access the rock space extender login page then try changing the browser or else update your browser first. Also you can try to use altogether a different device for the setup process like another tablet or another cell phone. If the problem still persists then we recommend you resetting the extender. For that push the needle or paperclip inside the reset hole of the rockspace extender for around 10 seconds while the extender is still plugged in to the wall. While resetting you will see some changes in the lights of the extender.



Saturday, 23 May 2020

Step to Know How to Connect Rockspace Wifi Extender

    Step to Know How to Connect Rockspace Wifi Extender




The wifi repeater is necessary for all persons who wish to connect freely to the Internet at home. Today there is a broad range of models with dissimilar shapes and functions. The judgment of the right device can be tricky, especially if you don’t know much about it yet. Here is a comparison of the best models and some tips for choosing the right one.

What is a wifi repeater?

The wifi repeater, also called wifi amplifier, is an accessory that increases the signal of a wireless connection. Indeed, this one repeats around him the wifi exposure of the Internet box or the router in order to extend and get better the network.It usually takes the form of a small box and plugs it into a wall outlet. All long-distance wifi repeaters work in much the same way. Throughput, range, ease of use, and functionality can differ from one model to another. Below you can read about How to install rockspace wifi extender.

How to Install Rockspace Wifi Extender

Once placed in an intermediate position between the router and the devices, it is time to configure it. A secure connection must be established between the router and the WiFi extender, so that the data going to the Internet interchanges.

The easiest way to do this is through WPS (WiFi Protect Setup). Routers have a WPS button (usually on the back) that allows other devices to connect to them without having to enter the password. We press the WPS button on the router, and then the WPS button on the WiFi extender (sometimes called the Range Extender, or another name), and the devices will communicate with each other. The extender will begin to amplify the signal, and you can already detect it with your mobile, tablet, etc.

The implementation is child’s play when you have a repeater with WPS option and a WPS compatible router. Besides, the vast majority of repeaters have a WPS button, while this is not the case for all boxes ( freeboxes in particular are not always provided with this).

Here is step by step How to install rockspace wifi extender.

With the WPS button it only takes a minute to do everything:

·         Place the repeater on an outlet and turn it on;
·         Press the WPS button on the repeater;
·         Press the WPS button on the box;
·         Surf online!

So follow the rockspace wifi extender setup instructions and make the installation easy for you.

If your modem or repeater does not have WPS, then it will be necessary to go through a web interface or an application. In this case, you must go to your ISP’s support site (Orange, Free, etc.) and follow their personalized advice if want to know How to install rockspace wifi extender.

Wednesday, 22 April 2020

Call For +1-8777520602-Rockspace Extender setup

Rockspace Wifi and Extender setup guide 


Click here to start rockspace extender setup via re-rockspace-local.com. Bought new extender and trying to set it up for the very first time, tired of trying re.rockspace.local? Get here on re-rockspace-local and get instant online help from technicians. Providing online chat support, email support and call support too. Rockspace have wide range of devices including extenders, routers, mesh systems, headphones, etc. Here on our website we provide you step by step instruction for rockspaceRSD0608 extender setup, rockspace RSD0607extender setup, and rockspace AC1200 dual band mesh system setup.

In case rockspace local isn't working you can simply type 192.168.0.254 in the browser and start the setup. You can also follow the blogs given here and get, to the point information for each model number. Many times we find it difficult since rockspace extender doesn't show online in the Wi-Fi list, for this issue it is recommended you reset the extender and plugin ethernet directly from repeater to the computer. In case you still have issue get in touch with the support team here. In case you have any query regarding the device you can shoot us an email at https://re-rockspace-local.com/. Stay safe, Stay indoors.

Phone No :- +1-8777520602


Monday, 13 April 2020

How to setup Re-rockspace-local Wifi Extender

            How to setup Re-rockspace-local Wifi Extender 


For larger areas where wireless transmission is required, re-rockspace-localwifi extender acts as a repeater to boost the signal and prevents it from dead zone area. Basically, re-rock-space-local wifi extender works at 2.4G band thereby providing full signal coverage with transmission speed of 300 Mbps. Also, AC1200 wifi range extender is available that works at dual band and boost your home network by increasing the range and speed of wifi signal. To setup the connection with router, one has to just press the WPS button and within few seconds the connection to extend the signal will be established. Similarly, a reset button is provided on the device by which the wifi extender can be restored to default settings. The reset button has to be pressed until the indicator turns red.

Steps to Follow Re-Rockspace-local wifi extender Configuration


To configure and connecting the re-rockspace-local wifi extender to a device, one must follow the rockspace wifi extender setup instructions provided on http //re-rockspace-local. For extending the wifi signal by wifi extender, we can make use of WPS button or can also login to Web UI (using a smart phone) and check the signal strength. Moreover for better wifi coverage and signal strength, the antennas must be positioned accordingly. Once you login successfully to web UI, you can check the status of connected router or devices and wifi name. On this page, we can also modify the settings of wifi extender and can setup new login name and password. To save and activate any of the modified settings, we have to reboot the extender. But if we reset the extender, then it will be set to the default settings and one has to setup all the settings again in the extender.

Sometimes, the device may perform abnormal operations, then one has to visit the rockspace wifi extender website http://re.rockspace.local or 192.168.0.254 and use the updated software to resolve the particular problem.

Thursday, 9 April 2020

Re-Rockspae-local Router setup Tips and tricks


Re-Rock space-local WiFi extender setup

For larger areas where wireless transmission is required, re-rockspace-local wifi extender acts as a repeater to boost the signal and prevents it from dead zone area. Basically, re-rock-space-local wifi extender works at 2.4G band thereby providing full signal coverage with transmission speed of 300 Mbps. Also, AC1200 wifi range extender is available that works at dual band and boost your home network by increasing the range and speed of wifi signal. To setup the connection with router, one has to just press the WPS button and within few seconds the connection to extend the signal will be established. Similarly, a reset button is provided on the device by which the wifi extender can be restored to default settings. The reset button has to be pressed until the indicator turns red.

Steps to Follow Re-Rockspace-local wifi extender Configuration




To configure and connecting the re-rockspace-local wifi extender to a device, one must follow the rockspace wifi extender setup instructions provided on http //re-rockspace-local. For extending the wifi signal by wifi extender, we can make use of WPS button or can also login to Web UI (using a smart phone) and check the signal strength. Moreover for better wifi coverage and signal strength, the antennas must be positioned accordingly. Once you login successfully to web UI, you can check the status of connected router or devices and wifi name. On this page, we can also modify the settings of wifi extender and can setup new login name and password. To save and activate any of the modified settings, we have to reboot the extender. But if we reset the extender, then it will be set to the default settings and one has to setup all the settings again in the extender.



Sunday, 5 April 2020

Re-rockspace-local wifi extender setup

Tips Re-rockspace-local wifi extender setup




For larger areas where wireless transmission is required, re-rockspace-local wifi extender acts as a repeater to boost the signal and prevents it from deadzone area. Basically, re-rockspace-localwifi extender works at 2.4G band thereby providing full signal coverage with transmission speed of 300 Mbps. Also, AC1200 wifi range extender is available that works at dual band and boost your home network by increasing the range and speed of wifi signal. To setup the connection with router, one has to just press the WPS button and within few seconds the connection to extend the signal will be established. Similarly, a reset button is provided on the device by which the wifi extender can be restored to default settings. The reset button has to be pressed until the indicator turns red.



Steps to Follow Re-Rockspace-local wifi extender Configuration

To configure and connecting the re-rockspace-local wifi extender to a device, one must follow the rockspace wifi extender setup instructions provided on http //re-rockspace-local For extending the wifi signal by wifi extender, we can make use of WPS button or can also login to Web UI (using a smart phone) and check the signal strength. Moreover for better wifi coverage and signal strength, the antennas must be positioned accordingly. Once you login successfully to web UI, you can check the status of connected router or devices and wifi name. On this page, we can also modify the settings of wifi extender and can setup new login name and password. To save and activate any of the modified settings, we have to reboot the extender. But if we reset the extender, then it will be set to the default settings and one has to setup all the settings again in the extender.



How to setup using Re-rockspace-local


Basically, the wireless signal of any router can be strengthen or repeated to provide full signal coverage in dead-zone areas and this is fulfilled by the Rockspacewireless range extender. The setup for this extender can only be done through offline mode at

Read more...

Sunday, 22 March 2020

Setup rock space guide 2020

                       How to Setup Rock space Extender





Rock space extenders are well known in the market when it comes to best affordable extenders without compromising with the quality of wifi Connection. If you are on this page because you wanted to Setup Rock space Extender then just follow the below given instructions. First of all make sure that your Rock space Extender is plugged in to the wall near your router then only start the Re-Rock space-Local Setup process. Before we start Setup its important to make sure extender have solid light on power.

How to Configure re-rock space-local rock space extender setup via WPS

1. Firstly wait until the power light on the extender turns solid.2. Now just push the WPS on the Rock-space extender for setup.3. Push a WPS on your router within 2 minutes.4.Solid WPS Light on the extender means it is working properly.5. In case your Extender isn’t getting connected to the router reset the extender.6. You can also start WPS on your router’s webpage>settings>WPS>enable.7. Lastly, you can unplug it and place it within the range of router.

Setup Rock space Extender via re-rock space local

1. Firstly, connect your wireless cellphone or laptop to the Rockspace’s default Wifi network i.e. Rockspace_Ext.
2. Secondly, once connected to Rockspace_Ext open a browser and type re.rockspcace.local or 192.168.0.254.
3. Now create a login password for your new rockspace account.
4. Also it will scan all the available networks in your area, Select the one that you want to extend.
5. Next type the password of your main wifi, the one you use for your router’s wifi.
6. You can even customise the name for your rockspace extender i.e. its SSID.
7. Once done, it will show you a message saying EXTENDED SUCCESSFULLY.
8. Blue light means proper connection on the other hand red means you need to move it closer .
9. Finally, in case http re.rockspace local doesnt work try resetting the extender.

Re-rock space.local not working

Rock space extender setup hardly takes 2 mins especially when done via WPS. If you opt for web browser Setup then it might take 5 mins by going online on re-rock space.local or 192.168.0.254. But many times we face errors while doing the online setup. There can be numerous reasons for this, follow the steps below to correct the error and setup the extender.

Things to remember while setting up Rock space via web browser

Firstly you need to understand re-rock space.local is an Offline page that is used to setup rock space extenders. So what that means is, you don’t need working wi-fi or internet connection to login into this page. You just need to make sure that you have a laptop or cell phone i.e. is connected to the default extender’s name i.e. Rock space_EXT. So once you connect to this network name you will not be able to go online on any web page and it will also show you as unsecured network in your Wi-Fi list. Now, simply open any browser (safari, google, firefox) on the very same device and in the address bar or url type the setup URL. First and foremost make sure you go through the rock space manual properly.

If you type Without http, re.rockspace.local it won’t work and you won’t be ever able to reach the Setup page.

So, that’s the trick type re-rock space.local (with colons and forward slashes). Once on the setup page you just need to follow the on screen instructions and your device after successful setup will show you solid blue light. Another Important way of setting up extender is by typing 192.168.0.254 in the address bar. This is also a direct link just like re-rock space local which takes you to setup page. Clearly, if you follow above all steps your extender will start working fine.