Re-Rockspae-local Router setup Tips and tricks

Re-Rock space-local WiFi extender setup

For larger areas where wireless transmission is required, re-rockspace-local wifi extender acts as a repeater to boost the signal and prevents it from dead zone area. Basically, re-rock-space-local wifi extender works at 2.4G band thereby providing full signal coverage with transmission speed of 300 Mbps. Also, AC1200 wifi range extender is available that works at dual band and boost your home network by increasing the range and speed of wifi signal. To setup the connection with router, one has to just press the WPS button and within few seconds the connection to extend the signal will be established. Similarly, a reset button is provided on the device by which the wifi extender can be restored to default settings. The reset button has to be pressed until the indicator turns red.

Steps to Follow Re-Rockspace-local wifi extender Configuration

To configure and connecting the re-rockspace-local wifi extender to a device, one must follow the rockspace wifi extender setup instructions provided on http //re-rockspace-local. For extending the wifi signal by wifi extender, we can make use of WPS button or can also login to Web UI (using a smart phone) and check the signal strength. Moreover for better wifi coverage and signal strength, the antennas must be positioned accordingly. Once you login successfully to web UI, you can check the status of connected router or devices and wifi name. On this page, we can also modify the settings of wifi extender and can setup new login name and password. To save and activate any of the modified settings, we have to reboot the extender. But if we reset the extender, then it will be set to the default settings and one has to setup all the settings again in the extender.

Read more....

Re-rockspace-local wifi extender setup

Tips Re-rockspace-local wifi extender setup

For larger areas where wireless transmission is required, re-rockspace-local wifi extender acts as a repeater to boost the signal and prevents it from deadzone area. Basically, re-rockspace-localwifi extender works at 2.4G band thereby providing full signal coverage with transmission speed of 300 Mbps. Also, AC1200 wifi range extender is available that works at dual band and boost your home network by increasing the range and speed of wifi signal. To setup the connection with router, one has to just press the WPS button and within few seconds the connection to extend the signal will be established. Similarly, a reset button is provided on the device by which the wifi extender can be restored to default settings. The reset button has to be pressed until the indicator turns red.

Steps to Follow Re-Rockspace-local wifi extender Configuration

To configure and connecting the re-rockspace-local wifi extender to a device, one must follow the rockspace wifi extender setup instructions provided on http //re-rockspace-local For extending the wifi signal by wifi extender, we can make use of WPS button or can also login to Web UI (using a smart phone) and check the signal strength. Moreover for better wifi coverage and signal strength, the antennas must be positioned accordingly. Once you login successfully to web UI, you can check the status of connected router or devices and wifi name. On this page, we can also modify the settings of wifi extender and can setup new login name and password. To save and activate any of the modified settings, we have to reboot the extender. But if we reset the extender, then it will be set to the default settings and one has to setup all the settings again in the extender.

How to setup using Re-rockspace-local

Basically, the wireless signal of any router can be strengthen or repeated to provide full signal coverage in dead-zone areas and this is fulfilled by the Rockspacewireless range extender. The setup for this extender can only be done through offline mode at

Read more...

Setup rock space guide 2020

                       How to Setup Rock space Extender

Rock space extenders are well known in the market when it comes to best affordable extenders without compromising with the quality of wifi Connection. If you are on this page because you wanted to Setup Rock space Extender then just follow the below given instructions. First of all make sure that your Rock space Extender is plugged in to the wall near your router then only start the Re-Rock space-Local Setup process. Before we start Setup its important to make sure extender have solid light on power.

How to Configure re-rock space-local rock space extender setup via WPS

1. Firstly wait until the power light on the extender turns solid.2. Now just push the WPS on the Rock-space extender for setup.3. Push a WPS on your router within 2 minutes.4.Solid WPS Light on the extender means it is working properly.5. In case your Extender isn’t getting connected to the router reset the extender.6. You can also start WPS on your router’s webpage>settings>WPS>enable.7. Lastly, you can unplug it and place it within the range of router.

Setup Rock space Extender via re-rock space local

1. Firstly, connect your wireless cellphone or laptop to the Rockspace’s default Wifi network i.e. Rockspace_Ext.

2. Secondly, once connected to Rockspace_Ext open a browser and type re.rockspcace.local or 192.168.0.254.

3. Now create a login password for your new rockspace account.

4. Also it will scan all the available networks in your area, Select the one that you want to extend.

5. Next type the password of your main wifi, the one you use for your router’s wifi.

6. You can even customise the name for your rockspace extender i.e. its SSID.

7. Once done, it will show you a message saying EXTENDED SUCCESSFULLY.

8. Blue light means proper connection on the other hand red means you need to move it closer .

9. Finally, in case http re.rockspace local doesnt work try resetting the extender.

Re-rock space.local not working

Rock space extender setup hardly takes 2 mins especially when done via WPS. If you opt for web browser Setup then it might take 5 mins by going online on re-rock space.local or 192.168.0.254. But many times we face errors while doing the online setup. There can be numerous reasons for this, follow the steps below to correct the error and setup the extender.

Things to remember while setting up Rock space via web browser

Firstly you need to understand re-rock space.local is an Offline page that is used to setup rock space extenders. So what that means is, you don’t need working wi-fi or internet connection to login into this page. You just need to make sure that you have a laptop or cell phone i.e. is connected to the default extender’s name i.e. Rock space_EXT. So once you connect to this network name you will not be able to go online on any web page and it will also show you as unsecured network in your Wi-Fi list. Now, simply open any browser (safari, google, firefox) on the very same device and in the address bar or url type the setup URL. First and foremost make sure you go through the rock space manual properly.

If you type Without http, re.rockspace.local it won’t work and you won’t be ever able to reach the Setup page.

So, that’s the trick type re-rock space.local (with colons and forward slashes). Once on the setup page you just need to follow the on screen instructions and your device after successful setup will show you solid blue light. Another Important way of setting up extender is by typing 192.168.0.254 in the address bar. This is also a direct link just like re-rock space local which takes you to setup page. Clearly, if you follow above all steps your extender will start working fine.